Advantages and Disadvantages of Dye Sublimation printed polyester fabric

Dye sublimation printing is, by definition, the sublimating of dye in printed polyester fabric. The way it works is like this. First, a transfer paper is printed on a digital printer that is set up with CMYO dye cartridges rather than your typical CMYK inks. CMYK, or four color process printing (4CP is the shorthand version of CMYK which stands for cyan-magenta-yellow-black) is used in surface printing of materials, including direct-to-printed polyester fabric printing, but does not become part of the printed polyester fabric like dye sub printing does.

Dye sublimation uses dyes, as I said, and a CMYO dye cartridge set that replace the black in CMYK printing with an “Overprint Clear.” The inkjet printer that is set up to print dyes (this cannot be done interchangeably without a significant amount of know-how and expense, so once a printer is set up to print dyes, it is usually not converted back to standard CMYK inkjet printing) prints a mirror image of whatever it is that needs printed on a treated dye-accepting paper known generically as “transfer paper.”

This paper is now “married” to a piece of polyester or another synthetic printed polyester fabrics (polyester is the most common due to its versatility in look and usage – from stretchable trade show booth printed polyester fabrics to garments to outdoor flags and a whole lot more) and then it is fed through heated rollers that combine heat – about 375°F or 210°C – with pressure to expand the cells of the printed polyester fabric and convert the dye to a gaseous state.

The dye is sublimated into the open pores of the polymeric synthetic material, and as it cools again, traps the sublimated dye within the cells of the printed polyester fabric. Because the dye became gaseous, it does not create a dot pattern during the sublimation process like inkjet printing will on printed polyester fabric or vinyl or other rigid plastic substrates, rather it creates a continuous tone print much like how photographs are developed and look.

So, now that I’ve explained the basic difference between dye sublimation printing and inkjet printing, I’ll address the original question of the advantages or disadvantages of both. As you may know, I don’t think there’s a lot of disadvantages to dye sublimation printing on printed polyester fabric, but I’ll give you the two that I can think of off the top of my head. First, it is slower than inkjet printing because you have two processes in the heat transfer part of dye sublimation, so labor costs are going to be higher to some degree, although there are now printers that have the printed polyester fabric and paper inline and they are drawn into the heated rollers as the printer continues to print.

The second disadvantage is also a production issue that is being solved by the newer printer/roller units just explained in the previous paragraph. In the past, and still in the present, it is not uncommon for the printed polyester fabric to get a crease or wrinkle in it, or the paper, and suddenly the whole transfer print and piece of printed polyester fabric are ruined. You would have to start over. Many of those who have been at this for awhile and are using older equipment charge higher prices per square foot for wider material, but many also don’t who have the newer equipment.

As far as advantages, I talked about the continuous tone printing that creates brighter and smoother color variations and transitions than you’ll find with inkjet printing, and a superior overall look, in our opinion. Also, because the dye impregnates or is sublimated in the printed polyester fabric, it is permanent and cannot flake off like some types of ink will, particularly garment inks used for t-shirts or inks printed on rigid substrates. So, durability and appearance are probably the best examples of the superiority of dye sublimation printing of printed polyester fabric or garments.

Barry Brown has been in the Sign, Banner, Decal and Display Business for over 20 years. It isn’t what he thought he’d do with his life, but he says he knows too much now to do anything else! If you want to get a quick quote for cloth banners done through dye sublimation printing, see here:

He has been marketing these products online since 1998, and the company he was general manager of in 1998 was the first sign company to be listed on Yahoo!

Barry is a great resource for information regarding Signs, Banners, Decals, and Displays, and is also an outstanding source of information on how to shop online without getting ripped off.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s