The process of inspection is done for any fault rate, printed satin fabric weight, edge to edge or end to end shading, shrinkage, printed satin fabric construction, print defect, hand. Product inspection is a very crucial aspect of modern textile industrial manufacturing. It can be referred to as the inspection of raw materials which are used in garments manufacturing. In order to avoid printed satin fabric irregularities and rejection due to printed satin fabric quality, manufacturers inspect the stock of the printed chiffon fabric early in the production process. The process of inspection is done for any fault rate,printed chiffon fabric weight, edge to edge or end to end shading, shrinkage, printed chiffon fabric construction, print defect, hand feel, width or length, color, and appearance. In short, the printed chiffon fabric inspection machine is used to inspect the look and feel of the printed chiffon fabric along with its quality.
When you are going to ship a printed chiffon fabric roll, you should be confident that the printed chiffon fabric is of the highest quality. The custom printed fabric inspection process ensures to minimize the rejected garments and the rejection of cut panels often happen due to the custom printed fabric faults. In this way, not only manufacturer ensures finished garment quality but also improves timely deliveries and efficiency. The whole process of custom printed fabric inspection is done in a safe and suitable environment with proper lighting and ventilation.
Different kinds of Printed polyester fabric defects can easily figure out with the help of inspection method applied on the Printed polyester fabric. The missing end, miss pick, kink, double pick, fuzz balls, fine end, fly, hard size, float, coarse end or pick, bar, bad selvedge, end out and chafe are few defects types often occurred in the manufacturing process of garments.
Printed polyester fabric Inspection Machine is defined as a device used to check the garment if they meet required measurement and quality. It helps to trace the defect source, so that appropriates measures can be taken to make the use of faulty Printed polyester fabric as well. It determines the printed fabric quality and minimizes the later reoccurrence of the defect. It also forward the data to the proper management levels as to the quality being produces.
The machine usually comes in two different models such as I-TEX and Cyclops. I- TEX is often used for manual operation as it is cost- effective, faster and reliable way to inspect the printed fabric. It further comes in four different categories which include I-TEX 1000, I-TEX 2000, I-TEX 2000D and Loom TEX. The advantages of using I-TEX machine include – substantial saving on operation and inspection expenses, reduced customer claims, accessible andaccurate data quality, and consistent and reliable quality standards.
plain silk fabric inspection machine price
Another plain silk fabric inspection machine model is Cyclops in which inspection unit use a moving image acquisition head attached on the off- loom above the roll of the plain silk fabric. An illumination unit and a camera have installed in it by which the Wholesale african prints fabric image is taken and forwarded to the image processing unit at an interval of pre- defined positions. Proprietary algorithms are applied to detect deviations from standard and to analyze the Wholesale african prints fabric texture. Calibration software is also used to optimize the settings of illuminations and camera. Lower work-load, 100% detection of defects, higher Wholesale african prints fabric quality, free from human perception and real-time defect detection are some of the attractive benefits of Cyclops.